Power plan
Balanced lets cores sleep and clocks drop between frames. That saves power and adds small delays when a core has to wake up. For a gaming PC on mains power, use High Performance.
powercfg /setactive SCHEME_MIN
Then in Advanced power settings:
- Processor performance core parking min cores: 100%. Parked cores take time to unpark.
- USB selective suspend: Disabled. Stops the mouse or headset dropping into low power.
- PCI Express Link State Power Management: Off.
Check which plan is active with powercfg /getactivescheme, and list them all with powercfg /list.
Ultimate Performance
Windows has a hidden plan that goes one step further than High Performance. Add it with:
powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61
Then pick it in Power Options. On most desktops the difference to High Performance is small. Test both.
AMD X3D chips with two CCDs
Dynamic tick
Windows skips timer ticks while idle to save power. Turning that off gives a steady tick, which some people find smoother in games. It's harmless on a desktop.
bcdedit /set disabledynamictick yes
Reboot to apply. Undo with bcdedit /deletevalue disabledynamictick.
Timer resolution
Games ask Windows for a 1 ms (or 0.5 ms) timer so their frame pacing and input sampling are tight. Since Windows 10 2004, that request only applies to the process that made it, and Windows 11 ignores it when the game is minimized.
The registry value GlobalTimerResolutionRequests brings back the old behavior, where one request applies to the whole system:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel" /v GlobalTimerResolutionRequests /t REG_DWORD /d 1 /f
Timer-resolution tools that force 0.5 ms all the time are a different story. On some CPUs they help frame times, on others they make them worse. Benchmark before you keep one.
Win32PrioritySeparation
This value controls how long a thread runs before Windows switches to another one, and how much the foreground app gets boosted. 0x26 (decimal 38) means short, variable time slices with the biggest boost for the window you're in. That's the common pick for games.
reg add "HKLM\SYSTEM\CurrentControlSet\Control\PriorityControl" /v Win32PrioritySeparation /t REG_DWORD /d 38 /f
Values like 0x28 or 0x14 get passed around as "the best". The differences are tiny and depend on the game. Pick one and leave it.
CPU idle states (C-states)
Turning off C-states keeps every core awake. It can lower latency spikes, and it raises idle temperatures and power draw a lot. On Intel CPUs it can also block turbo on some boards.
This one is a real trade-off, so PatroneOS Tweaks asks before it does it. If you try it, compare frame-time graphs in a benchmark you trust, not just average FPS.
You can do it in the BIOS (C-States: Disabled) or per power plan with Processor idle disable in the advanced settings, which is easier to undo.
How to test these properly
- Pick one benchmark you can repeat: a replay, a practice range route, or a built-in benchmark.
- Record frame times with CapFrameX or PresentMon, three runs each.
- Change one setting, reboot, record again.
- Keep it only if the 1% lows or frame-time spikes improve beyond the run-to-run noise.
Undo everything
powercfg -restoredefaultschemes
bcdedit /deletevalue disabledynamictick
reg delete "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\kernel" /v GlobalTimerResolutionRequests /f
reg add "HKLM\SYSTEM\CurrentControlSet\Control\PriorityControl" /v Win32PrioritySeparation /t REG_DWORD /d 2 /f
Run them in an admin Terminal and reboot. 2 is the Windows default for Win32PrioritySeparation.
Questions
Is High Performance bad for my CPU?
No. It keeps clocks and cores ready, which raises idle power use and temperature a little. The CPU still protects itself with its own limits.
Do timer resolution tools give more FPS?
Not more FPS. At best they make frame pacing and input timing more even on some systems. On others they add overhead. Measure it on your PC.
Which Win32PrioritySeparation value is best?
There's no single best. 0x26 is a sensible pick for games, and the differences between the popular values are within measurement noise for most people.
Why didn't anything change?
If your GPU is at full load, CPU scheduling settings barely matter. They help most in CPU-bound esports games at high FPS.
On PatroneOS, PatroneOS Tweaks applies this guide for you, and asks first on anything that's a trade-off.
