Before you touch anything
Install the current driver for your card from nvidia.com, or let PatroneOS Control do it. If you came from an AMD card or a messy install, do a clean install so old profiles don't stick around.
Then open NVIDIA Control Panel, go to Manage 3D settings and work in the Global Settings tab. Use a game's Program Settings only when that one game needs something different.
Global 3D settings
| Setting | Set to | Why |
|---|---|---|
| Low Latency Mode | On | Keeps the CPU from queueing frames ahead. Use Ultra only in games without Reflex. |
| Power management mode | Prefer maximum performance | Stops the GPU dropping clocks mid-fight in light scenes. Costs some idle power, so set it per game if you care. |
| Texture filtering, Quality | High performance | A small gain on lower-end cards. Slightly softer textures at steep angles. |
| Vertical sync | Off | Unless you use G-SYNC, see below. |
| Max Frame Rate | Off | Cap in-game or with Reflex instead. With G-SYNC, see below. |
| Shader Cache Size | Driver Default | Raise it only if a game recompiles shaders and stutters every launch. |
| Threaded optimization | Auto | Forcing it rarely helps and breaks some older games. |
Reflex beats driver settings
If the game has NVIDIA Reflex (Valorant, CS2, Fortnite, Apex, Overwatch 2 and more), turn it on in the game, set to On + Boost if you're GPU-bound. Reflex overrides Low Latency Mode in that game, so you don't need both.
Reflex matters most when your GPU is at 95%+ usage. If you're CPU-bound at 400 FPS, it changes little.
G-SYNC without the input lag
G-SYNC only works while your FPS is below the refresh rate. Go over it and you're back to tearing or V-Sync lag. The setup that avoids both:
- Set up G-SYNC: enable it for full screen mode (or windowed and full screen).
- Vertical sync: On in the Control Panel, off in the game.
- Cap FPS about 3 below refresh, for example 237 on a 240 Hz monitor. Reflex does this cap for you when G-SYNC and V-Sync are on.
For the absolute lowest latency at very high FPS, many pros skip G-SYNC and run uncapped with V-Sync off. You'll see tearing; whether that bothers you is personal.
Display settings
- Change resolution: pick the highest refresh rate. Windows often leaves new monitors at 60 Hz. PatroneOS Control sets this for you.
- Output dynamic range: Full, for PC monitors over DisplayPort or HDMI.
- Stretched resolution: in Adjust desktop size and position, choose Full-screen, perform scaling on GPU, and tick "Override the scaling mode set by games and programs".
Leave these alone
- Anisotropic filtering, antialiasing overrides: set them in the game instead.
- Background Max Frame Rate: only matters when you alt-tab.
- "Disable fullscreen optimizations" on the exe: on Windows 11 with a current driver, flip model presentation already gives you full-screen latency in borderless.
DLSS, Frame Generation and competitive games
- DLSS Super Resolution renders at a lower resolution and upscales. It raises FPS when you're GPU-bound, at the cost of some sharpness on small, distant targets. In esports titles you're rarely GPU-bound, so leave it off unless you need it.
- Frame Generation inserts generated frames between real ones. Your FPS counter goes up, but input lag does too, because the newest real frame is held back. Keep it off in competitive shooters. It's made for single-player games.
AMD cards: the same ideas
On a Radeon card, open AMD Software, Gaming, Graphics:
| Setting | Set to | Why |
|---|---|---|
| Radeon Anti-Lag | On | AMD's version of low latency mode. Use the in-game option where a game supports it. |
| Radeon Chill | Off | Lowers FPS when you're not moving, which feels inconsistent in shooters. |
| Radeon Boost | Off | Drops resolution during fast movement. |
| Enhanced Sync | Off | Can cause stutter. Use FreeSync with a frame cap instead. |
| Wait for Vertical Refresh | Off, unless application specifies | Same reason as V-Sync off on NVIDIA. |
Check that it worked
- Turn on the performance overlay in the NVIDIA App (Alt+R) and look at PC latency with Reflex on and off.
- Watch GPU usage. Near 100% means you're GPU-bound and Reflex and Low Latency Mode help most. Much lower means the CPU is the limit.
- Compare frame times, not just FPS, in the same spot. See fix stutter.
Questions
Should I use Ultra Low Latency Mode?
Only in games without Reflex. In Reflex games, turn Reflex on and the driver setting doesn't matter.
Does "Prefer maximum performance" damage the GPU?
No. It keeps clocks up while a game runs, which uses more power and makes the card a bit warmer, within its normal limits.
Do I have to redo this after a driver update?
A normal update keeps your settings. A clean install resets them, so note them down or let Patrone Utility reapply them.
Is G-SYNC worse for competitive play?
Set up as above, with a cap below your refresh rate, it adds very little latency and removes tearing. Running uncapped without it can be slightly faster at very high FPS. Both are fine choices.
On PatroneOS, part of this guide is already set. The rest is up to you.
