Turn off acceleration
Settings > Bluetooth & devices > Mouse > Additional mouse settings > Pointer Options. Untick Enhance pointer precision. With it on, the same hand movement moves the cursor different distances depending on speed, so your muscle memory never settles.
Leave the Windows pointer speed at the middle notch (6 of 11). Anything else scales the movement and can skip pixels.
Raw input
Most modern shooters read the mouse directly with raw input, which skips the Windows pointer settings entirely. If a game has a "Raw Input Buffer" or "Raw Input" option, turn it on. Valorant's Raw Input Buffer can lower CPU load on high polling rates.
DPI
DPI is how many counts the mouse sends per inch. Your real sensitivity is DPI × in-game sens, so 800 DPI at 0.4 equals 1600 DPI at 0.2.
A bit higher DPI with a lower in-game sens gives smoother small adjustments. 800 to 1600 is the common range. Very high DPI on some sensors adds smoothing, so don't go wild.
eDPI and cm/360
To compare sensitivity between players or games, use eDPI (DPI × in-game sensitivity) within one game, or cm/360, the distance you move the mouse for a full turn, across games. Most sensitivity converters online use cm/360. Find a value you like, then keep it the same in every shooter.
Mouse software settings
- Angle snapping (prediction): off. It straightens your movements, which feels wrong on flicks.
- Motion sync: on some mice it adds a tiny delay to line up sensor reports with USB polls. Test it, many players turn it off.
- Lift-off distance: low, so the cursor doesn't drift when you lift and reposition the mouse.
- Onboard memory: save your DPI and polling rate to the mouse, then you can close or uninstall the vendor software, which often runs in the background.
Polling rate
| Rate | Interval | Notes |
|---|---|---|
| 1000 Hz | 1 ms | Safe on any PC. The default to start from. |
| 2000 to 4000 Hz | 0.5 to 0.25 ms | Smoother tracking on high refresh monitors. Uses more CPU. |
| 8000 Hz | 0.125 ms | Some games stutter or drop FPS with it. Test with your CPU. |
If FPS drops when you move the mouse fast, your polling rate is too high for that game.
Plug high polling rate mice straight into a USB port on the motherboard's back panel, not a hub or front-panel port, and keep other high-rate devices on a different port.
Keyboard
- Repeat delay: shortest, repeat rate fastest, in Control Panel > Keyboard.
- Sticky Keys and Filter Keys shortcuts: turn them off, so pressing Shift five times mid-game doesn't pop a dialog. PatroneOS already does this.
- Rapid trigger and actuation point: on Hall effect or magnetic keyboards, a shorter actuation and rapid trigger make counter-strafing faster. Set them in the keyboard's software and save to onboard memory.
Check your setup
- Open a polling rate tester in your browser and move the mouse fast. The number should stay near the rate you set.
- In a game's practice range, flick between two targets at the same distance a few times. If the cursor lands in a different spot depending on how fast you move, acceleration is still on somewhere, in Windows, the mouse software or the game.
Questions
What's the best DPI for gaming?
There's no best number. 800 to 1600 works well on modern sensors. What matters is that your overall sensitivity, eDPI or cm/360, stays the same so your aim can settle.
Does Enhance pointer precision affect games?
Not in games that use raw input, which is most shooters. It still affects the desktop and some older games, so turn it off anyway.
Is 8000 Hz worth it?
On a strong CPU and a high refresh monitor, tracking can feel smoother. On many PCs it costs FPS and causes stutter. 1000 to 2000 Hz is the safe middle.
Wireless or wired?
Current gaming wireless mice are as fast as wired ones. Keep the receiver close, ideally on the desk with the extension cable, away from Wi-Fi routers and USB 3 devices.
On PatroneOS, PatroneOS Tweaks applies this guide for you, and asks first on anything that's a trade-off.
