Guides BIOS

BIOS basics for a gaming PC

A lot of PCs run their RAM below rated speed and ship with Resizable BAR off. Four BIOS settings, all free, all worth checking.

Read
4 min
Risk
Medium
PatroneOS
Do it yourself
Updated

Get into the BIOS

Hold Del or F2 while the PC starts, or from Windows: Settings > System > Recovery > Advanced startup > Restart now > Troubleshoot > UEFI Firmware Settings. Menus differ per brand, so search the setting names below in your board's manual if you can't find them.

Before you change anything: take photos of the screens you edit. If the PC won't boot, clear CMOS (button or jumper on the board) to go back to defaults.

XMP or EXPO

RAM boots at a slow default speed (often 4800 MT/s for DDR5) until you turn on its profile. Intel boards call it XMP, AMD boards EXPO or DOCP. Turning it on is the biggest free FPS gain in this list, especially for 1% lows in CPU-heavy games.

After enabling it, run a memory stress test like OCCT or TestMem5 for half an hour. If it errors or crashes, drop one speed step.

Check it worked: Task Manager, Performance, Memory shows the speed. With two sticks, they should be in the slots the manual marks for dual channel, usually A2 and B2. CPU-Z's Memory tab should say Dual.

The first boot after enabling XMP or EXPO can take a while on DDR5 while the board trains the memory. Give it a few minutes before you assume it failed.

Resizable BAR

Lets the CPU access all of the GPU's memory at once instead of 256 MB at a time. Worth a few percent in some games on RTX 30-series and newer and on RX 6000 and newer.

  • Above 4G Decoding: Enabled.
  • Re-Size BAR Support: Enabled (AMD calls it Smart Access Memory).
  • CSM: Disabled. ReBAR only works with UEFI boot.

Check in NVIDIA Control Panel > System Information, or AMD Software, that it shows as on.

Secure Boot and TPM

Windows 11 needs both, and so does Vanguard. They're off on a lot of boards, or the PC boots in legacy mode.

  • TPM: AMD calls it fTPM, Intel calls it PTT. Enable it.
  • Secure Boot: Enabled, with the standard or default keys installed. It only works with CSM off.

Check in Windows: run tpm.msc for TPM and msinfo32 for "Secure Boot State: On".

Leave virtualization on

SVM (AMD) or VT-x and VT-d (Intel) are sometimes turned off as a "tweak". Windows needs them for Memory Integrity and other security features that some anti-cheats check, and for WSL and Windows Sandbox. Leave them enabled.

BIOS updates

New BIOS versions fix memory compatibility and CPU bugs, and are needed for some newer CPUs. Update from the board maker's own site using the board's built-in flash tool, from a USB stick. Never turn the PC off during a flash.

Intel 13th and 14th gen Core: update to a BIOS with Intel's latest microcode for the instability issue, and use the board's Intel Default Settings profile instead of unlimited power limits.

A BIOS update usually resets your settings, so turn XMP or EXPO, Resizable BAR, TPM and Secure Boot back on afterwards.

Fan curves and temperatures

A CPU or GPU that hits its temperature limit slows down. Set a fan curve that ramps up under load in the BIOS fan settings, and check temperatures with HWiNFO while gaming. Dust filters and a clean cooler matter more than any setting.

Leave these for later

Manual overclocks, undervolts, Curve Optimizer and memory timings can all add performance, and all need proper stability testing per chip. They're not "set and forget" tweaks.

Want them done safely? A Crown tune covers memory and CPU tuning with stability testing, live with you.

Questions

Is XMP safe?

Yes. It runs the RAM at the speed and voltage the maker rated and tested it for. It's not a manual overclock. Rarely a kit and board don't agree at that speed, which is why you test.

Does Resizable BAR always help?

Most games gain a little or stay the same. A few run slightly worse, and NVIDIA's driver only turns it on for games where it tested a gain.

Do I need Secure Boot for gaming?

For Valorant on Windows 11, yes. Some other anti-cheats check it too, and Windows 11 expects it.

Will these settings void my warranty?

XMP, EXPO, Resizable BAR, TPM and Secure Boot are standard features. Manual overclocking is different, so check your CPU and board maker's terms before you do that.